IPX DEFINITIONS ::= BEGIN



-- This MIB defines the management information for a system using the IPX

-- protocol.  The MIB consists of four groups:

--

--    1.  System Group - contains general information about all instances

--                       of IPX on the system

--

--    2.  Circuit Group - contains information about all circuits used by

--                        IPX on the system

--

--    3.  Forwarding Group - contains generic routing information that

--                           must be provided by any IPX routing protocol.

--

--    4.  Services Group - contains information about all known services.

--

-- The MIB is designed to support multiple instances of the IPX

-- protocol on one system via a system instance identifier which is the

-- primary index for every table in this MIB.

--

-- This MIB is designed to provide a basic framework for the management

-- of systems implementing the IPX protocol.  Additional MIBs may be

-- created (especially in the area of IPX routing protocols) to contain

-- more specific information.  Whenever possible, these additional MIBs

-- should follow the format of this IPX MIB.  Information in these MIBs

-- should be linked to this MIB via the use of the system instance 

-- identifier mentioned above.

--

--

-- Changes:

--

--    4/15/94:  Cleanup of some typographical errors

--

--    4/21/94:  Change ipxCircNetNumber acces to read-write





IMPORTS

        enterprises, Counter

                FROM RFC1155-SMI

        OBJECT-TYPE

                FROM RFC-1212

        TRAP-TYPE

                FROM RFC-1215

        PhysAddress

                FROM RFC1213-MIB;



novell  OBJECT IDENTIFIER ::= { enterprises 23 }

mibDoc  OBJECT IDENTIFIER ::= { novell 2 }

ipx     OBJECT IDENTIFIER ::= { mibDoc 5 }





-- Groups



ipxSystem OBJECT IDENTIFIER ::= {ipx 1}

ipxCircuit OBJECT IDENTIFIER ::= {ipx 2}

ipxForwarding OBJECT IDENTIFIER ::= {ipx 3}

ipxServices OBJECT IDENTIFIER ::= {ipx 4}

ipxTraps OBJECT IDENTIFIER ::= {ipx 5}



-- Types



NetNumber ::= OCTET STRING (SIZE(4))



-- System Group

--   This group contains global information about each instance of IPX

--   running on one system.



-- Basic System Table

--   This table contains one entry for each instance of IPX running on

--   the system.  It contains the management information that should

--   be made available by all implementations of the IPX protocol.



ipxBasicSysTable OBJECT-TYPE

   SYNTAX      SEQUENCE OF IPXBasicSysEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "The IPX System table - basic information."

   ::= {ipxSystem 1}



ipxBasicSysEntry OBJECT-TYPE

   SYNTAX      IPXBasicSysEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "Each entry corresponds to one instance of IPX running

                on the system."

   INDEX       {ipxBasicSysInstance}

   ::= {ipxBasicSysTable 1}



IPXBasicSysEntry ::= SEQUENCE {

                        ipxBasicSysInstance

                           INTEGER,

                        ipxBasicSysExistState

                           INTEGER,

                        ipxBasicSysNetNumber

                           NetNumber,

                        ipxBasicSysNode

                           OCTET STRING,

                        ipxBasicSysName

                           OCTET STRING,

                        ipxBasicSysInReceives

                           Counter,

                        ipxBasicSysInHdrErrors

                           Counter,

                        ipxBasicSysInUnknownSockets

                           Counter,

                        ipxBasicSysInDiscards

                           Counter,

                        ipxBasicSysInBadChecksums

                           Counter,

                        ipxBasicSysInDelivers

                           Counter,

                        ipxBasicSysNoRoutes

                           Counter,

                        ipxBasicSysOutRequests

                           Counter,

                        ipxBasicSysOutMalformedRequests

                           Counter,

                        ipxBasicSysOutDiscards

                           Counter,

                        ipxBasicSysOutPackets

                           Counter,

                        ipxBasicSysConfigSockets

                           INTEGER,

                        ipxBasicSysOpenSocketFails

                           Counter

                    }

                           

ipxBasicSysInstance OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the instance of IPX to which this

                row corresponds.  This value may be written only when

                creating a new entry in the table."

   ::= {ipxBasicSysEntry 1}



ipxBasicSysExistState OBJECT-TYPE

   SYNTAX      INTEGER {

                        off(1),

                        on(2)

                       }

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The validity of this entry in the IPX system table.

                Setting this field to off indicates that this entry may be

                deleted from the system table at the IPX implementation's

                discretion."

   ::= {ipxBasicSysEntry 2}



ipxBasicSysNetNumber OBJECT-TYPE

   SYNTAX      NetNumber

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The network number portion of the IPX address of this

                system."

   ::= {ipxBasicSysEntry 3}



ipxBasicSysNode OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(6))

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The node number portion of the IPX address of this

                system."

   ::= {ipxBasicSysEntry 4}



ipxBasicSysName OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(0..48))

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The readable name for this system."

   ::= {ipxBasicSysEntry 5}



ipxBasicSysInReceives OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The total number of IPX packets received, including

                those received in error."

   ::= {ipxBasicSysEntry 6}



ipxBasicSysInHdrErrors OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of IPX packets discarded due to errors in

                their headers, including any IPX packet with a size less

                than the minimum of 30 bytes."

   ::= {ipxBasicSysEntry 7}



ipxBasicSysInUnknownSockets OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of IPX packets discarded because the

                destination socket was not open."

   ::= {ipxBasicSysEntry 8}



ipxBasicSysInDiscards OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of IPX packets received but discarded due to

                reasons other than those accounted for by 

                ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets,

                ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards."

   ::= {ipxBasicSysEntry 9}



ipxBasicSysInBadChecksums OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of IPX packets received with incorrect

                checksums."

   ::= {ipxBasicSysEntry 10}



ipxBasicSysInDelivers OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The total number of IPX packets delivered locally,

                including packets from local applications."

   ::= {ipxBasicSysEntry 11}



ipxBasicSysNoRoutes OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of times no route to a destination was

                found."

   ::= {ipxBasicSysEntry 12}



ipxBasicSysOutRequests OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of IPX packets supplied locally for

                transmission, not including any packets counted in

                ipxAdvForwPackets."

   ::= {ipxBasicSysEntry 13}



ipxBasicSysOutMalformedRequests OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of IPX packets supplied locally that contained

                errors in their structure."

   ::= {ipxBasicSysEntry 14}



ipxBasicSysOutDiscards OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of outgoing IPX packets discarded due to

                reasons other than those accounted for in

                ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered,

                and ipxAdvSysOutCompressDiscards."

   ::= {ipxBasicSysEntry 15}



ipxBasicSysOutPackets OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The total number of IPX packets transmitted."

   ::= {ipxBasicSysEntry 16}



ipxBasicSysConfigSockets OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The configured maximum number of IPX sockets that may be

                open at one time."

   ::= {ipxBasicSysEntry 17}



ipxBasicSysOpenSocketFails OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of IPX socket open calls which failed."

   ::= {ipxBasicSysEntry 18}





-- Advanced System Table

--   This table contains one entry for each instance of IPX running on

--   the system.  It contains the advanced management information that

--   may not be available from all implementations of the IPX protocol.



ipxAdvSysTable OBJECT-TYPE

   SYNTAX      SEQUENCE OF IPXAdvSysEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "The IPX System table - advanced information."

   ::= {ipxSystem 2}



ipxAdvSysEntry OBJECT-TYPE

   SYNTAX      IPXAdvSysEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "Each entry corresponds to one instance of IPX running

                on the system."

   INDEX       {ipxAdvSysInstance}

   ::= {ipxAdvSysTable 1}



IPXAdvSysEntry ::= SEQUENCE {

                     ipxAdvSysInstance

                        INTEGER,

                     ipxAdvSysMaxPathSplits

                        INTEGER,

                     ipxAdvSysMaxHops

                        INTEGER,

                     ipxAdvSysInTooManyHops

                        Counter,

                     ipxAdvSysInFiltered

                        Counter,

                     ipxAdvSysInCompressDiscards

                        Counter,

                     ipxAdvSysNETBIOSPackets

                        Counter,

                     ipxAdvSysForwPackets

                        Counter,

                     ipxAdvSysOutFiltered

                        Counter,

                     ipxAdvSysOutCompressDiscards

                        Counter,

                     ipxAdvSysCircCount

                        INTEGER,

                     ipxAdvSysDestCount

                        INTEGER,

                     ipxAdvSysServCount

                        INTEGER

                    }

                           

ipxAdvSysInstance OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the instance of IPX to which this

                row corresponds.  This value may be written only when

                creating a new entry in the table."

   ::= {ipxAdvSysEntry 1}



ipxAdvSysMaxPathSplits OBJECT-TYPE

   SYNTAX      INTEGER (1..32)

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The maximum number of paths with equal routing metric

                value which this instance of the IPX may split

                between when forwarding packets."

   DEFVAL      { 1 }

   ::= {ipxAdvSysEntry 2}



ipxAdvSysMaxHops OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The maximum number of hops a packet may take."

   DEFVAL      { 64 }

   ::= {ipxAdvSysEntry 3}



ipxAdvSysInTooManyHops OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of IPX packets discarded due to exceeding the

                maximum hop count."

   ::= {ipxAdvSysEntry 4}



ipxAdvSysInFiltered OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of incoming IPX packets discarded due to

                filtering."

   ::= {ipxAdvSysEntry 5}



ipxAdvSysInCompressDiscards OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of incoming IPX packets discarded due to

                decompression errors."

   ::= {ipxAdvSysEntry 6}



ipxAdvSysNETBIOSPackets OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of NETBIOS packets received."

   ::= {ipxAdvSysEntry 7}



ipxAdvSysForwPackets OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of IPX packets forwarded."

   ::= {ipxAdvSysEntry 8}



ipxAdvSysOutFiltered OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of outgoing IPX packets discarded due to

                filtering."

   ::= {ipxAdvSysEntry 9}



ipxAdvSysOutCompressDiscards OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of outgoing IPX packets discarded due to

                compression errors."

   ::= {ipxAdvSysEntry 10}



ipxAdvSysCircCount OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of circuits known to this instance of IPX."

   ::= {ipxAdvSysEntry 11}



ipxAdvSysDestCount OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of currently reachable destinations known to

                this instance of IPX."

   ::= {ipxAdvSysEntry 12}



ipxAdvSysServCount OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of services known to this instance of IPX."

   ::= {ipxAdvSysEntry 13}





-- Circuit Group

--   This group contains management information for each circuit known

--   to this system.



-- Circuit Table

--   The Circuit table contains an entry for each circuit known to the

--   system.



ipxCircTable OBJECT-TYPE

   SYNTAX      SEQUENCE OF IPXCircEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "The Circuit table."

   ::= {ipxCircuit 1}



ipxCircEntry OBJECT-TYPE

   SYNTAX      IPXCircEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "Each entry corresponds to one circuit known to the

                system."

   INDEX       {

                ipxCircSysInstance,

                ipxCircIndex

               }

   ::= {ipxCircTable 1}



IPXCircEntry ::= SEQUENCE {

                     ipxCircSysInstance

                        INTEGER,

                     ipxCircIndex

                        INTEGER,

                     ipxCircExistState

                        INTEGER,

                     ipxCircOperState

                        INTEGER,

                     ipxCircIfIndex

                        INTEGER,

                     ipxCircName

                        OCTET STRING,

                     ipxCircType

                        INTEGER,

                     ipxCircDialName

                        OCTET STRING,

                     ipxCircLocalMaxPacketSize

                        INTEGER,

                     ipxCircCompressState

                        INTEGER,

                     ipxCircCompressSlots

                        INTEGER,

                     ipxCircStaticStatus

                        INTEGER,

                     ipxCircCompressedSent

                        Counter,

                     ipxCircCompressedInitSent

                        Counter,

                     ipxCircCompressedRejectsSent

                        Counter,

                     ipxCircUncompressedSent

                        Counter,

                     ipxCircCompressedReceived

                        Counter,

                     ipxCircCompressedInitReceived

                        Counter,

                     ipxCircCompressedRejectsReceived

                        Counter,

                     ipxCircUncompressedReceived

                        Counter,

                     ipxCircMediaType

                        OCTET STRING,

                     ipxCircNetNumber

                        NetNumber,

                     ipxCircStateChanges

                        Counter,

                     ipxCircInitFails

                        Counter,

                     ipxCircDelay

                        INTEGER,

                     ipxCircThroughput

                        INTEGER,

                     ipxCircNeighRouterName

                        OCTET STRING,

                     ipxCircNeighInternalNetNum

                        NetNumber

                    }



ipxCircSysInstance OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the instance of IPX

                to which this entry corresponds.  This value may be 

                written only when creating a new entry in the table."

   ::= {ipxCircEntry 1}



ipxCircIndex OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The identifier of this circuit, unique within the

                instance of IPX.  This value may be written

                only when creating a new entry in the table."

   ::= {ipxCircEntry 2}



ipxCircExistState OBJECT-TYPE

   SYNTAX      INTEGER {

                        off(1),

                        on(2)

                       }

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The validity of this circuit entry.  A circuit with this

                value set to off may be deleted from the table at the

                IPX implementation's discretion."

   ::= {ipxCircEntry 3}



ipxCircOperState OBJECT-TYPE

   SYNTAX      INTEGER {

                        down(1),

                        up(2),

                        sleeping(3)

                       }

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The operational state of the circuit."

   ::= {ipxCircEntry 4}



ipxCircIfIndex OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The value of ifIndex for the interface used by this

                circuit.  This value may be written only when creating

                a new entry in the table."

   ::= {ipxCircEntry 5}



ipxCircName OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(0..48))

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The readable name for the circuit."

   ::= {ipxCircEntry 6}



ipxCircType OBJECT-TYPE

   SYNTAX      INTEGER {

                        other(1),

                        broadcast(2),

                        ptToPt(3),

                        wanRIP(4),

                        unnumberedRIP(5),

                        dynamic(6),

                        wanWS(7)

                       }

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The type of the circuit."

   ::= {ipxCircEntry 7}



ipxCircDialName OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(0..48))

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The symbolic name used to refernce the dialing information

                used to create this circuit.  This value may be written 

                only when creating a new entry in the table."

   ::= {ipxCircEntry 8}



ipxCircLocalMaxPacketSize OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The maximum size (including header), in bytes, that the

                system supports locally on this circuit."

   ::= {ipxCircEntry 9}



ipxCircCompressState OBJECT-TYPE

   SYNTAX      INTEGER {

                        off(1),

                        on(2)

                       }

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The compression state on this circuit.  This value may 

                be written only when creating a new entry in the table."

   DEFVAL      { off }

   ::= {ipxCircEntry 10}



ipxCircCompressSlots OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The number of compression slots available on this 

                circuit.  This value may be written only when creating a

                new entry in the table."

   DEFVAL      { 16 }

   ::= {ipxCircEntry 11}



ipxCircStaticStatus OBJECT-TYPE

   SYNTAX      INTEGER {

                        unknown(1),

                        current(2),

                        changed(3),

                        read(4),

                        reading(5),

                        write(6),

                        writing(7)

                       }

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "Indicates whether the information about static routes

                and services reached via this circuit matches that

                saved in permanent storage (current).  Setting the

                value to write when it had the value changed will write

                the currently in use information to permanent storage, 

                if supported.  Setting the value to read when it had

                the value changed will replace any routes and services

                currently defined for the circuit with those read from

                permanent storage, if supported."

   ::= {ipxCircEntry 12}



ipxCircCompressedSent OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of compressed packets sent."

   ::= {ipxCircEntry 13}



ipxCircCompressedInitSent OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of compression initialization packets sent."

   ::= {ipxCircEntry 14}



ipxCircCompressedRejectsSent OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of compressed packet rejected packets sent."

   ::= {ipxCircEntry 15}



ipxCircUncompressedSent OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of packets sent without being compressed

                even though compression was turned on for this circuit."

   ::= {ipxCircEntry 16}



ipxCircCompressedReceived OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of compressed packets received."

   ::= {ipxCircEntry 17}



ipxCircCompressedInitReceived OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of compression initialization packets received."

   ::= {ipxCircEntry 18}



ipxCircCompressedRejectsReceived OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of compressed packet rejected packets received."

   ::= {ipxCircEntry 19}



ipxCircUncompressedReceived OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of packets received without having been

                compressed even though compression was turned on for

                this circuit."

   ::= {ipxCircEntry 20}



ipxCircMediaType OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(2))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The media type used on this circuit."

   ::= {ipxCircEntry 21}



ipxCircNetNumber OBJECT-TYPE

   SYNTAX      NetNumber

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The IPX network number of this circuit.  This value may

                be written only when creating a new entry in the table."

   ::= {ipxCircEntry 22}



ipxCircStateChanges OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of times the circuit has changed state."

   ::= {ipxCircEntry 23}



ipxCircInitFails OBJECT-TYPE

   SYNTAX      Counter

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of times that initialization of this

                circuit has failed."

   ::= {ipxCircEntry 24}



ipxCircDelay OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The period of time, in milliseconds, that it takes to

                transmit one byte of data, excluding protocol headers,

                to a destination on the other end of the circuit, if 

                the circuit is free of other traffic."

   ::= {ipxCircEntry 25}



ipxCircThroughput OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The amount of data, in bits per second, that may flow

                through the circuit if there is no other traffic."

   ::= {ipxCircEntry 26}



ipxCircNeighRouterName OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(0..48))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The name of the neighboring router on a WAN circuit."

   ::= {ipxCircEntry 27}



ipxCircNeighInternalNetNum OBJECT-TYPE

   SYNTAX      NetNumber

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The internal network number of the neighboring router

                on a WAN circuit."

   ::= {ipxCircEntry 28}





-- Forwarding Group

--   This group provides a representation of the forwarding database used

--   by all instances of IPX on the system.



-- Destination Table

--   The Destination table contains information about all known

--   destinations.  The routing information shown in this table represents

--   the path currently being used to reach the destination.



ipxDestTable OBJECT-TYPE

   SYNTAX      SEQUENCE OF IPXDestEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "The Destination table contains information about all

                known destinations."

   ::= {ipxForwarding 1}



ipxDestEntry OBJECT-TYPE

   SYNTAX      IPXDestEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "Each entry corresponds to one destination."

   INDEX       {

                ipxDestSysInstance,

                ipxDestNetNum

               }

   ::= {ipxDestTable 1}



IPXDestEntry ::= SEQUENCE {

                     ipxDestSysInstance

                        INTEGER,

                     ipxDestNetNum

                        NetNumber,

                     ipxDestProtocol

                        INTEGER,

                     ipxDestTicks

                        INTEGER,

                     ipxDestHopCount

                        INTEGER,

                     ipxDestNextHopCircIndex

                        INTEGER,

                     ipxDestNextHopNICAddress

                        PhysAddress,

                     ipxDestNextHopNetNum

                        NetNumber

                    }



ipxDestSysInstance OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the instance of IPX

                to which this row corresponds."

   ::= {ipxDestEntry 1}



ipxDestNetNum OBJECT-TYPE

   SYNTAX      NetNumber

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The IPX network number of the destination."

   ::= {ipxDestEntry 2}



ipxDestProtocol OBJECT-TYPE

   SYNTAX      INTEGER {

                        other(1),

                        local(2),

                        rip(3),

                        nlsp(4),

                        static(5)

                       }

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The routing protocol from which knowledge of this

                destination was obtained."

   ::= {ipxDestEntry 3}



ipxDestTicks OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The delay in ticks to reach this destination."

   ::= {ipxDestEntry 4}



ipxDestHopCount OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of hops necessary to reach the destination."

   ::= {ipxDestEntry 5}



ipxDestNextHopCircIndex OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the circuit used to reach the 

                next hop."

   ::= {ipxDestEntry 6}



ipxDestNextHopNICAddress OBJECT-TYPE

   SYNTAX      PhysAddress

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The NIC address of the next hop."

   ::= {ipxDestEntry 7}



ipxDestNextHopNetNum OBJECT-TYPE

   SYNTAX      NetNumber

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The IPX network number of the next hop."

   ::= {ipxDestEntry 8}





-- Static Routes Table

--   This table contains the information about all the static routes

--   defined.  There may be more than one static route to any given

--   destination.  Only the route currently being used will also be

--   present in the Destination Table defined above.



ipxStaticRouteTable OBJECT-TYPE

   SYNTAX      SEQUENCE OF IPXStaticRouteEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "The Static Routes table contains information about all

                destinations reached via statically configured routes."

   ::= {ipxForwarding 2}



ipxStaticRouteEntry OBJECT-TYPE

   SYNTAX      IPXStaticRouteEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "Each entry corresponds to one static route."

   INDEX       {

                ipxStaticRouteSysInstance,

                ipxStaticRouteCircIndex,

                ipxStaticRouteNetNum

               }

   ::= {ipxStaticRouteTable 1}



IPXStaticRouteEntry ::= SEQUENCE {

                           ipxStaticRouteSysInstance

                              INTEGER,

                           ipxStaticRouteCircIndex

                              INTEGER,

                           ipxStaticRouteNetNum

                              NetNumber,

                           ipxStaticRouteExistState

                              INTEGER,

                           ipxStaticRouteTicks

                              INTEGER,

                           ipxStaticRouteHopCount

                              INTEGER

                          }



ipxStaticRouteSysInstance OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the instance of IPX to

                which this row corresponds."

   ::= {ipxStaticRouteEntry 1}



ipxStaticRouteCircIndex OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the circuit used to

                reach the first hop in the static route."

   ::= {ipxStaticRouteEntry 2}



ipxStaticRouteNetNum OBJECT-TYPE

   SYNTAX      NetNumber

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The IPX network number of the route's destination."

   ::= {ipxStaticRouteEntry 3}



ipxStaticRouteExistState OBJECT-TYPE

   SYNTAX      INTEGER {

                        off(1),

                        on(2)

                       }

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The validity of this static route.  Entries with the

                value set to off may be deleted from the table at the

                implementation's discretion."

   ::= {ipxStaticRouteEntry 4}



ipxStaticRouteTicks OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The delay, in ticks, to reach the route's destination."

   ::= {ipxStaticRouteEntry 5}



ipxStaticRouteHopCount OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The number of hops necessary to reach the destination."

   ::= {ipxStaticRouteEntry 6}





-- Services Group

--   The Services group contains management information for all known

--   services.



-- Services Table

--    This table contains the services information indexed by service

--    name and type.



ipxServTable OBJECT-TYPE

   SYNTAX      SEQUENCE OF IPXServEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "The table of services, indexed by name and type."

   ::= {ipxServices 1}



ipxServEntry OBJECT-TYPE

   SYNTAX      IPXServEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "Each entry corresponds to one service."

   INDEX       {

                ipxServSysInstance,

                ipxServType,

                ipxServName

               }

   ::= {ipxServTable 1}



IPXServEntry ::= SEQUENCE {

                     ipxServSysInstance

                        INTEGER,

                     ipxServType

                        OCTET STRING,

                     ipxServName

                        OCTET STRING,

                     ipxServProtocol

                        INTEGER,

                     ipxServNetNum

                        NetNumber,

                     ipxServNode

                        OCTET STRING,

                     ipxServSocket

                        OCTET STRING,

                     ipxServHopCount

                        INTEGER

                    }



ipxServSysInstance OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the instance of IPX

                to which this entry corresponds."

   ::= {ipxServEntry 1}



ipxServType OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(2))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The service type."

   ::= {ipxServEntry 2}



ipxServName OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(1..48))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The service name."

   ::= {ipxServEntry 3}



ipxServProtocol OBJECT-TYPE

   SYNTAX      INTEGER {

                        other(1),

                        local(2),

                        nlsp(4),

                        static(5),

                        sap(6)

                       }

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The protocol from which knowledge of this service was

                obtained."

   ::= {ipxServEntry 4}



ipxServNetNum OBJECT-TYPE

   SYNTAX      NetNumber

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The IPX network number portion of the IPX address of the

                service."

   ::= {ipxServEntry 5}



ipxServNode OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(6))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The node portion of the IPX address of the service."

   ::= {ipxServEntry 6}



ipxServSocket OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(2))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The socket portion of the IPX address of the service."

   ::= {ipxServEntry 7}



ipxServHopCount OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of hops to the service."

   ::= {ipxServEntry 8}





-- Destination Services Table

--   This table contains the services information indexed by address, 

--   name, and type.



ipxDestServTable OBJECT-TYPE

   SYNTAX      SEQUENCE OF IPXDestServEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "The table of services, indexed by address, name,

                and type."

   ::= {ipxServices 2}



ipxDestServEntry OBJECT-TYPE

   SYNTAX      IPXDestServEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "Each entry corresponds to one service."

   INDEX       {

                ipxDestServSysInstance,

                ipxDestServNetNum,

                ipxDestServNode,

                ipxDestServSocket,

                ipxDestServName,

                ipxDestServType

               }

   ::= {ipxDestServTable 1}



IPXDestServEntry ::= SEQUENCE {

                        ipxDestServSysInstance

                           INTEGER,

                        ipxDestServNetNum

                           NetNumber,

                        ipxDestServNode

                           OCTET STRING,

                        ipxDestServSocket

                           OCTET STRING,

                        ipxDestServName

                           OCTET STRING,

                        ipxDestServType

                           OCTET STRING,

                        ipxDestServProtocol

                           INTEGER,

                        ipxDestServHopCount

                           INTEGER

                       }



ipxDestServSysInstance OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the instance of IPX

                to which this entry corresponds."

   ::= {ipxDestServEntry 1}



ipxDestServNetNum OBJECT-TYPE

   SYNTAX      NetNumber

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The IPX network number portion of the IPX address of the

                service."

   ::= {ipxDestServEntry 2}



ipxDestServNode OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(6))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The node portion of the IPX address of the service."

   ::= {ipxDestServEntry 3}



ipxDestServSocket OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(2))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The socket portion of the IPX address of the service."

   ::= {ipxDestServEntry 4}



ipxDestServName OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(1..48))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The service name."

   ::= {ipxDestServEntry 5}



ipxDestServType OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(2))

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The service type."

   ::= {ipxDestServEntry 6}



ipxDestServProtocol OBJECT-TYPE

   SYNTAX      INTEGER {

                        other(1),

                        local(2),

                        nlsp(4),

                        static(5),

                        sap(6)

                       }

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The protocol from which knowledge of this service was

                obtained."

   ::= {ipxDestServEntry 7}



ipxDestServHopCount OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-only

   STATUS      mandatory

   DESCRIPTION "The number of hops to the service."

   ::= {ipxDestServEntry 8}





-- Static Services Table

--   This table contains information for all services reached via a

--   static route.



ipxStaticServTable OBJECT-TYPE

   SYNTAX      SEQUENCE OF IPXStaticServEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "The Static Services table contains information about

                all services reached via statically configured routes."

   ::= {ipxServices 3}



ipxStaticServEntry OBJECT-TYPE

   SYNTAX      IPXStaticServEntry

   ACCESS      not-accessible

   STATUS      mandatory

   DESCRIPTION "Each entry corresponds to one service."

   INDEX       {

                ipxStaticServSysInstance,

                ipxStaticServCircIndex,

                ipxStaticServName,

                ipxStaticServType

               }

   ::= {ipxStaticServTable 1}



IPXStaticServEntry ::= SEQUENCE {

                           ipxStaticServSysInstance

                              INTEGER,

                           ipxStaticServCircIndex

                              INTEGER,

                           ipxStaticServName

                              OCTET STRING,

                           ipxStaticServType

                              OCTET STRING,

                           ipxStaticServExistState

                              INTEGER,

                           ipxStaticServNetNum

                              NetNumber,

                           ipxStaticServNode

                              OCTET STRING,

                           ipxStaticServSocket

                              OCTET STRING,

                           ipxStaticServHopCount

                              INTEGER

                          }



ipxStaticServSysInstance OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The unique identifier of the instance of IPX to which

                this entry corresponds."

   ::= {ipxStaticServEntry 1}



ipxStaticServCircIndex OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The circuit used to reach this service."

   ::= {ipxStaticServEntry 2}



ipxStaticServName OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(1..48))

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The service name."

   ::= {ipxStaticServEntry 3}



ipxStaticServType OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(2))

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The service type."

   ::= {ipxStaticServEntry 4}



ipxStaticServExistState OBJECT-TYPE

   SYNTAX      INTEGER {

                        off(1),

                        on(2)

                       }

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The validity of this static service.  Entries with the

                value set to off may be deleted from the table at the

                implementation's discretion."

   ::= {ipxStaticServEntry 5}



ipxStaticServNetNum OBJECT-TYPE

   SYNTAX      NetNumber

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The IPX network number portion of the IPX address of the

                service."

   ::= {ipxStaticServEntry 6}



ipxStaticServNode OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(6))

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The node portion of the IPX address of the service."

   ::= {ipxStaticServEntry 7}



ipxStaticServSocket OBJECT-TYPE

   SYNTAX      OCTET STRING (SIZE(2))

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The socket portion of the IPX address of the service."

   ::= {ipxStaticServEntry 8}



ipxStaticServHopCount OBJECT-TYPE

   SYNTAX      INTEGER

   ACCESS      read-write

   STATUS      mandatory

   DESCRIPTION "The number of hops to the service."

   ::= {ipxStaticServEntry 9}





-- Traps

--   The section describes the traps defined for IPX.



ipxTrapCircuitDown TRAP-TYPE

   ENTERPRISE    ipxTraps

   VARIABLES     {

                  ipxCircSysInstance,

                  ipxCircIndex

                 }

   DESCRIPTION   "This trap signifies that the specified circuit has

                  gone down."

   ::= 1



ipxTrapCircuitUp TRAP-TYPE

   ENTERPRISE    ipxTraps

   VARIABLES     {

                  ipxCircSysInstance,

                  ipxCircIndex

                 }

   DESCRIPTION   "This trap signifies that the specified circuit has

                  come up."

   ::= 2



END